Fibtele technical configuration brief
Product: Pre-terminated Patch Cord
Catalog slug: pre-terminated-patch-cord
Category: fiber-optic-passive-components

Published technical record
Fiber patch cord with pulling eyes Armored fiber patchcord can be used directly in different harsh environment without additional protection. The Stainless steel tube prevents optic fiber from damage that improves stability of the system and reduce the cost for maintenance. Simplex, Duplex Armored Patch cord are also available. They are suitable for LAN systems, FTTH,intelligent optical fiber network in buildings, underground network systems, CCTV security systems, broadcasting and cable TV network systems.Wirenet provides the broadest choice of armored patch cords to the industry including ST, FC,SC, FDDI, ESCON, LC, MTRJ, and MU with Ultra-polished (UPC), Angle-Polished (APC) or other polish requirement. Applications: · CATV; Active device termination; · Telecommunication networks; · Metro; · Local Area Networks; · Data processing networks; · Test equipment; · Premise installation; · Wide Area Networks;

Features
- CATV; Active device termination;
- Telecommunication networks;
- Metro;
- Local Area Networks;
- Data processing networks;
- Test equipment;
- Premise installation;
- Wide Area Networks;
- --Low insertion and back reflection loss
- --Good exchangeability
- --Good durability
- --High temperature stability
- --Standard: Telcordia GR-326-CORE

Applications
- Pre-terminated Patch Cord in fiber-optic cable assembly and network installation
- A configured optical connection matched to the cable, connector, and route requirements (Connector Type: Pre-terminated Patch Cord; Fiber Type: SM (9/125µm), MM (50/125µm, 62.5/125µm))

Specifications
- Connector Type: Pre-terminated Patch Cord
- Fiber Type: SM (9/125µm), MM (50/125µm, 62.5/125µm)
- Polish Type: UPC/APC
- Cable Type: 0.9mm/2.0mm/3.0 mm
- Insertion Loss: ≤ 0.3 dB
- Return Loss: ≥ 50 dB (UPC), ≥ 60 dB (APC)
- Operating Temperature: -40°C ~ +85 °C
- Standard: Telcordia GR-326, IEC 61753

Buyer questions
Q: Which configuration should be confirmed for Pre-terminated Patch Cord?
A: Confirm the model, interfaces, dimensions, and the applicable parameters before quotation. The current record includes Connector Type: Pre-terminated Patch Cord; Fiber Type: SM (9/125µm), MM (50/125µm, 62.5/125µm); Polish Type: UPC/APC; Cable Type: 0.9mm/2.0mm/3.0 mm; the final drawing and compatibility review control the order.

Q: Where is Pre-terminated Patch Cord used?
A: Typical uses include Pre-terminated Patch Cord in fiber-optic cable assembly and network installation; A configured optical connection matched to the cable, connector, and route requirements (Connector Type: Pre-terminated Patch Cord; Fiber Type: SM (9/125µm), MM (50/125µm, 62.5/125µm)). Select the application only after checking the complete link, process, or installation requirements.

Q: What testing or documentation is supplied for Pre-terminated Patch Cord?
A: Available documents and test records depend on the ordered configuration. Request the applicable drawing, inspection or test method, and acceptance record; no MOQ, lead time, certification, or performance claim is implied without written confirmation.


Ordering note
This configuration brief is generated from the published catalog record. Confirm the exact drawing, compatibility, inspection or test method, documents, quantity, MOQ and lead time in the written quotation before ordering.
Editorial record updated: 2026-09-30T00:00:00-07:00